Hioki 3390-10 功率分析仪

SPECIFICATIONS
- Measurement line type: 
   + Single-phase 2-wire, single-phase 3-wire
   + Three-phase 3-wire, threephase 4-wire
   + Voltage 4 channels, Current 4 channels
   + Isolated between each channel
- Measurement items: 
   + Voltage, Current, Voltage/current waveform peak
   + Active power, Phase angle, Frequency, Current integration 
   + Reactive power, Apparent power, Power factor
   + Power integration, Efficiency, Loss, Voltage/current ripple factor
   + Noise measurement,RMS spectrum of voltage/current Harmonic measurement
   + RMS value, Content factor, Phase angle
   + Total distortion, Disequilibrium factor
   + Additional functions: Torque, Rotation, Frequency, Slip, or Motor output
- Harmonic measurement:
   + Input: 4 channels, Synchronization frequency range: 0.5 Hz to 5 kHz
   + Number of harmonic orders: Max. 100th order
- Noise measurement:
   + Number of channels: 1ch (select one channel from CH1 to CH4)
   + Maximum analysis frequency: 100k/50k/20k/10k/5k/2kHz
- Measurement range:
   + 15~1500V, 7 ranges
   + 400mA to 500A (20A/50A/200A/500A)
   + Power range: 6.0000 W to 2.2500 MW 
   + Frequency: 0.5 Hz to 5 kHz
- Basic accuracy(45Hz to 66Hz):
   + Voltage: ±0.05 % rdg. ±0.05 % f.s
   + Current: ±0.05 % rdg. ±0.05 % f.s
   + Active power: ±0.05 % rdg. ±0.05 % f.s
- Synchronization frequency range: 0.5 Hz to 5 kHz
- Frequency band: DC, 0.5 Hz to 150 kHz
- Data update rate: 50ms
- Display refresh rate: 200ms
- Data save interval: OFF, 50~500ms,1~30s, 1~60min, 15settings
- External interfaces:
   + LAN, USB (communication/ memory)
   + RS-232C, CF card, Synchronization control
- Power supply: 100~240V AC, 50/60Hz, 140VA max.
- Product Net Weight: 4.8 kg
- Product Size: 340*170*157mm
- Supplied accessories:
    + Instruction Manual for Model 3390-10 ×1
   + Measurement Guide ×1
   + Power cord ×1, USB cable ×1, D-sub connector ×1
   + Color label ×2
- The warranty period: 12 month
Detail

 

Measurement line type Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, threephase 4-wire, Voltage 4 channels, Current 4 channels, Isolated between each channel
Measurement items Voltage, Current, Voltage/current waveform peak, Active power, Reactive power, Apparent power, Power factor, Phase angle, Frequency, Current integration, Power integration, Efficiency, Loss, Voltage/current ripple factor
Noise measurement (FFT processing): RMS spectrum of voltage/current
Harmonic measurement: RMS value, Content factor, Phase angle, Total distortion, Disequilibrium factor
Additional functions (With optional 9791 or 9793 installed in the main unit) : Torque, Rotation, Frequency, Slip, or Motor output
Harmonic measurement Input: 4 ch, Synchronization frequency range: 0.5 Hz to 5 kHz,
Number of harmonic orders: Max. 100th order
Noise measurement Number of channels: 1 ch (select one channel from CH1 to CH4),
Maximum analysis frequency: 100 k/ 50 k/ 20 k/ 10 k/ 5 k/ 2 kHz
Measurement range Voltage range: 15 to 1500 V, 7 ranges
Current range: 400 mA to 500 A (depends on current sensor, 20A/ 50A/ 200A/ or 500A rated)
Power range: 6.0000 W to 2.2500 MW (depends on combination of voltage and current range)
Frequency range: 0.5 Hz to 5 kHz
Basic accuracy (45Hz to 66Hz) Voltage: ±0.05 % rdg. ±0.05 % f.s.
Current: ±0.05 % rdg. ±0.05 % f.s. (Defined at combined accuracy with dedicated sensors)
Active power: ±0.05 % rdg. ±0.05 % f.s. (Defined at combined accuracy with dedicated sensors)
Note: Accuracy for the high accuracy Models 3390-10 and Current Sensors are not defined individually. Please use these products in combination to obtain ±0.1% accuracy.
Synchronization frequency range 0.5 Hz to 5 kHz
Frequency band DC, 0.5 Hz to 150 kHz
Data update rate 50 ms (For harmonic measurement, depends on the synchronization frequency when less than 45 Hz)
Display refresh rate 200 ms (Independent of internal data update rate; waveform and FFT depend on the screen)
Data save interval OFF, 50 msec to 500 msec, 1 sec to 30 sec, 1 minute to 60 minutes, 15 settings
External interfaces LAN, USB (communication/ memory), RS-232C, CF card, Synchronization control
Power supply 100 to 240 V AC, 50/60 Hz, 140 VA max.
Dimensions, mass 340 mm (13.39 in) W × 170 mm (6.69 in) H × 157 mm (6.18 in) D, 4.8 kg (169.3 oz)
Supplied accessories Instruction Manual for Model 3390 ×1, Instruction Manual for Model 3390-10 ×1, Measurement Guide ×1, Power cord ×1, USB cable ×1, D-sub connector ×1 (when 9792 or 9793 is installed), Color label ×
Factory-installed option *Must specify when ordering
*Must specify when ordering
MOTOR TESTING OPTION 9791
MOTOR TESTING OPTION 9791 Factory-installed option - not user installable, built in the main unit
D/A OUTPUT OPTION 9792
D/A OUTPUT OPTION 9792 Factory-installed option - not user installable, built in the main unit
MOTOR TESTING & D/A OUTPUT OPTION 9793
MOTOR TESTING & D/A OUTPUT OPTION 9793 Factory-installed option - not user installable, built in the main unit
OPTION:
VOLTAGE CORD L9438-50
VOLTAGE CORD L9438-50 Black/ Red, 3 m (9.84 ft) length, Alligator clip ×2
GRABBER CLIP 9243
GRABBER CLIP 9243 Black / Red ×1, attaches to the tip of the Voltage Cord
Current measurement
Dedicated Pull-through Current Sensors (High Accuracy Models)
AC/DC CURRENT SENSOR 9709-10
AC/DC CURRENT SENSOR 9709-10 CAT III 1000 V, 500A AC/DC rated current, DC to 100kHz response, core dia. 36 mm (1.42 in), cord length 3 m (9.84 ft)
AC/DC CURRENT SENSOR CT6863-10
AC/DC CURRENT SENSOR CT6863-10 CAT III 1000 V, 200A AC/DC rated current, DC to 500kHz response, core dia. 24 mm (0.94 in), cord length 3 m (9.84 ft)
AC/DC CURRENT SENSOR CT6862-10
AC/DC CURRENT SENSOR CT6862-10 CAT III 1000 V, 50A AC/DC rated current, DC to 1MHz response, core dia. 24 mm (0.94 in), cord length 3 m (9.84 ft)
Printer options
PRINTER 9670
PRINTER 9670 For display copy, includes 1 roll of recording paper, Power supply AC Adapter 9671, Not CE marked

 

DOWNLOAD CATALOG
pdficon 3390-10
product catalog.pdf (611 kB) (2013-06-25 updated)

 

  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化