For full functionality of this site it is necessary to enable JavaScript.

Máy đo điện trở HiTESTER Hioki RM3543(10mΩ~1000Ω)


Thông số kỹ thuật
- Cách thức đo:
   + Dùng cầu cân bằng
   + Dòng điện một chiều cố định
- Thang do:
   + 10mOhm(max 12mO/Độ phn giải 0.01mOhm)
   + 1000 Ohm( max 1200O/Độ phan giải 1mOhm)
- Hiển thị Màn hình đơn sắc LCD, có đèn nền
- Độ chính xác: Ở thang 10mOhm là ±0.060 % rdg. ±0.001 % f.s.
- Dòng kiểm tra:
   + Ở thang 10mOhm là 1A DC
   + Ở thang 1000 Ohm là 1mA Dc
- Điện áp hở: 20V DC

- Tỉ lệ lấy mẫu: Nhanh, Trung bình, Ch?m, 3 l?a ch?n
- Thời gian cập nhật:(PLC = Power line cycle)
   + Ở thang 10 mO : Nhanh~2ms/Trung bình~5ms/Chậm~1PLC
   + Ở thang 0.1~100ms: 5 PLC ở tần số 50Hz, 1~6 PLC Ở 60Hz
- Chức năng khác:
   + So sánh, trễ, OVC, tính trị số trung bình, phát hiện lỗi đo
   + Phát hiện bị ngắn mạch, nâng cao tính tiếp xúc
   + Cài đặt kiểu dòng điện, Tính toán thống kê
- Giao tiếp: I/O bên ngoài, RS-232, Máy in
- Nguồn: 100~240V AC, 50/60 Hz, 40VA max
- Kích thước: 260x88x300mm
- Khối lượng: 3kg
- Thiết bị đi kèm:
   + Dây nguồn x1, jack kết nối I/O (kiểu đực) x1
   + Tài liệu sử dụng x1, hướng dẫn hoạt động x1
- Bảo hành: 12 tháng

Chi tiết
Measurement method Four-terminal, constant-current DC
Resistance range 10 mΩ (Max. 12.00000 mΩ, 0.01 μΩ resolution) to 1000 Ω range (Max. 1200.000 Ω, 1 mΩ resolution), 7 steps
Display Monochrome graphic LCD 240 × 64 dot, white LED backlight
Measurement accuracy [at 10 mΩ range, with SLOW mode, average 16 times settings]
±0.060 % rdg. ±0.001 % f.s.
Testing current [at 10 mΩ range] 1 A DC to [at 1000 Ω range] 1 mA DC
Open-terminal voltage 20 V DC max. Note: Voltage when not measuring is 20 mV or less, with current mode set at PULSE and Contact Improver Setting set at OFF/PULSE (measured with a voltmeter having 10 MΩ)
Sampling rate FAST, MEDIUM, SLOW, 3 settings
Integration time [at 10 mΩ range, default value] FAST 2.0 ms, MED 5.0 ms, SLOW 1 PLC,
Setting range: 0.1 ms to 100.0 ms, or 1 to 5 PLC at 50 Hz, 1 to 6 PLC at 60 Hz
Note: PLC = one power line cycle (mains wave-form period)
Other functions Comparator (compare setting value with measurement value), Delay, OVC (offset voltage compensation), Average, Measurement fault detection, Probe short-circuit detection, Improve contact, Current mode setting (A pulse application function that applies current only during measurement), Auto-memory, Statistical calculations, Settings monitor (when using two instruments, a difference in settings causes warning notification), Retry, Trigger function. etc,.
Interface External I/O, RS-232C, Printer, GP-IB (Model RM3543-01)
External I/O Trigger, Hold input, Comparator output, Settings monitor terminal, Service power output +5V, +12V, etc.
Power supply, consumption 100 to 240 V AC, 50/60 Hz, 40 VA max.
Dimensions, mass 260 mm (10.24 in) W × 88 mm (3.46 in) H × 300 mm (11.81 in) D, 3.0 kg (105.8 oz)
Supplied accessories Power cord ×1, EXT I/O male connector ×1, Operation manual ×1, Operation guide ×1

catalog

  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi